Comfort-company Sideminder Arms User Manual download pdf

SIDEMINDER WITH ARMS AND SUPPORT PADS

For each quick release toggle (A): Open the

toggle, and while holding the toggle in place,

begin tightening the toggle nut (C) until

finger tight.

Insert the telescoping arms (B) into the tube

openings (D).

Toll Free 800.564.9248

www.comfortcompany.com

509 South 22nd Ave Bozeman, MT 59718

Adjust the telescoping arms (B) to the desired

distance and angle.

Close the toggles (A) to clamp down on the

telescoping arms (B).

Note: If the telescoping arms can still move with the toggles

closed, open the toggles and remove the arms. Then repeat

steps 1-4.

Lift the cover flap on the support pads (E) and

attach the pads to the telescoping arms (B) using

the provided pan head screws (F).

Adjust pads to the desired distance and angle

and then firmly tighten the screws.

IS-SIDEMINDERARMS

REV0413

Support pads come in 2 shapes: standard (7003) and contoured (7004) as shown below.

SideMinder® assembly should be installed to the chair before attaching the arms and support pads.

Parts from Kit Bag needed:

F: (4) ¼”-20 x .75” Philips Pan Head Screws

7004 SUPPORT PAD

7003 SUPPORT PAD

SIDEMINDER WITH ARMS AND SUPPORT PADS For each quick release toggle (A): Open the toggle, and while holding the toggle in place, begin tightening th

No comments

Comfort-company Sideminder Arms User Manual